VIBSCANNER 2 EX
The new VibScanner 2 Ex is a next-generation, explosion protection system for quickly detecting machine vibration in hazardous work environments. Measuring simultaneously on three axes, the VibScanner 2 Ex sets the benchmark for fast and accurate measurements of machine, gear, and bearing issues.
This is the ultimate tool for fast and accurate machine vibration measurements. The VibScanner 2 Ex heightens efficiency and data quality. In just a quarter of the time of a standard data-collector, it precisely measures available data in three axes. Equipped with a triaxial sensor, it requires only one measurement point and the click of a button to begin collecting machine data.
This device is ideal for route-based maintenance jobs in environments where explosion protection standards are required. Its rugged magnetic foot of the triaxial sensor fits perfectly on the housing of any motor, pump, fan, or other rotating device, detecting vibration right near the source.
The bottom line: High-speed vibration measurement without any loss of data or quality while both the employee on site and the maintenance specialist save a great deal of time.
Measurement channels
Number: 3 synchronous analog channels (X/Y/Z)
Z channel (0 ... 50 kHz):
-20 .. +20 V, input impedance: 78 kOhm ; IEPE ; Current Linedrive
X/Y channel (0 ... 10 kHz):
-20 .. +20 V, input impedance: 78 kOhm ; IEPE
Dynamic range: 109.5 dB (total)
Sampling rate: up to 131 kHz per channel
Signal processing: 3 x 24 bit ADCs
Measuring range/Accuracy:
Vibration acceleration: dependent on used sensor
Shock pulse: -10 dBsv to 80 dBsv +/- 2 dBsv
Fulfilled standard: DIN ISO 2954:2012 (2-1 kHz, 10 Hz -1 kHz, 10-10 KHz)
Display
Type: Capacitive touchscreen ; Optically bonded for high contrast and increased shock resistance
Color depth: 16 million colors
Viewing angle: < 140°
Operation: Multi touch – gesture control ; Glove-compatible
Supply
Type: Li ion rechargeable battery
Nominal voltage: 7.3 V
Energy density: 50 Wh (Ex device: 50 Wh)
Power adapter: 100-240 V~, 50-60 Hz (input) ; 12 V 3 A (output)
Computer
Processor ARM A9 - Quadcore 1 GHz
Memory microSD card, 32 GB for measurement data, permanently installed
2 GB RAM
RFID:
RFID reader module for PRÜFTECHNIK transponder: ALI 50.628 EX0-25, Complies with ISO 14443a and ISO 15693
Reading distance: 2...3 cm (13/16” ... 1 3/16”)
WiFi:
IEEE 802.11a/b/g/n/ac
Throughput: < 200 Mbps
Security: WPA2
Stroboscope Frequency range: 0.1 – 1000 Hz
Resolution: 0.06 1/min.
LEDs: Risk group 1 per IEC 62471
