A unique handheld measuring device with which even untrained personnel can easily and effectively measure machine vibration on rotating machinery. Thanks to its forward-looking measuring principle and data acquisition across three axes with the triaxial sensor, all relevant condition information is recorded with the touch of a single button. And at a measurement speed that opens up fully new dimensions. Not only is the VIBSCANNER 2 a breakthrough in terms of measurement speed and precision, but also through its robustness and its intuitive operating concept.


The intuitive graphical user interface assists the employee en route in taking repeatable error-free measurements. The device provides him/her with the exact information about the status of the measurement locations and the progress of the route.


Following completion of the measurement route, the data pack containing the results can be downloaded onto the PC and sent to the maintenance specialist by email. This means that the maintenance specialist is always provided with high-quality vibration and machine condition data which he can analyze with the OMNITREND Center software.


The bottom line: High-speed vibration measurement without any loss of data or quality while both the employee on site and the maintenance specialist save a great deal of time.

Measurement channels

Number: 3 synchronous analog channels (X/Y/Z)

Z channel (0 ... 50 kHz): 

-20 .. +20 V, input impedance: 78 kOhm ; IEPE ; Current Linedrive

X/Y channel (0 ... 10 kHz):

-20 .. +20 V, input impedance: 78 kOhm ; IEPE

Dynamic range: 109.5 dB (total)

Sampling rate: up to 131 kHz per channel

Signal processing: 3 x 24 bit ADCs

Measuring range/Accuracy: 

Vibration acceleration: dependent on used sensor

Shock pulse: -10 dBsv to 80 dBsv +/- 2 dBsv

Fulfilled standard: DIN ISO 2954:2012 (2-1 kHz, 10 Hz -1 kHz, 10-10 KHz)


Display 

Type: Capacitive touchscreen ; Optically bonded for high contrast and increased shock resistance

Color depth: 16 million colors

Viewing angle: < 140°

Operation: Multi touch – gesture control ; Glove-compatible


Supply

Type: Li ion rechargeable battery

Nominal voltage: 7.2 V (Ex device: 7.3V)

Energy density: 72 Wh (Ex device: 50 Wh)

Power adapter: 100-240 V~, 50-60 Hz (input) ; 12 V 3 A (output)


Computer

Processor ARM A9 - Quadcore 1 GHz

Memory microSD card, 32 GB for measurement data, permanently installed

2 GB RAM

RFID: 

RFID reader module for PRÜFTECHNIK transponder: ALI 50.628 EX0-25, Complies with ISO 14443a and ISO 15693

Reading distance: 2...3 cm (13/16” ... 1 3/16”)

WiFi: 

IEEE 802.11a/b/g/n/ac

Throughput: < 200 Mbps

Security: WPA2

Stroboscope Frequency range: 0.1 – 1000 Hz

Resolution: 0.06 1/min.

LEDs: Risk group 1 per IEC 62471


VIBSCANNER 2 datasheet



Share by: